Hi @Jeannie_Ruesch

So, if all 4 of the fields are empty, then the word “SEND” needs to be displayed in the new formula field.
That would be:

IF(
         AND(
                       {Event Name} = BLANK(),
                       {Location} = BLANK(),
                       {Start Date} = BLANK(),
                       {End Date} = BLANK() 
                       ),
         "SEND"
          )

Jeannie -

One minor change to what @Andre_Zijlstra provided: The next to last line should read "SEND" and not “SEND”. (The difference is subtle: Look at the style of quotation marks around the word.) This is only a problem if you mark-and-copy his formula; if you were to retype it, it would work fine.

@Andre_Zijlstra

If you precede and follow your formula text with three backticks (aka accent grave), as so —

```

— both the correct quotation style and indentation are preserved:

IF(
    AND(
        {Event Name} = BLANK(),
        {Location} = BLANK(),
        {Start Date} = BLANK(),
        {End Date} = BLANK()
        ),
    "SEND"
    )

@W_Vann_Hall
Thank you for taking time for this topic (again). It seems my Dutch keyboard could be reason for some confusion here.

This Quotes key:

is left of the key. I tried both options in the formula (“SEND”, and ‘SEND’) and both rendered the same result.

Another key (left of the <1>:

did not work. This seems to be the “Grave” key? And that is the one I should use preceding and following the formula text?

So, the backtick is not to be used in the formula text, but preceding and following the formula.
In the formula I should use the ’ keystroke in stead of "?

On European keyboards, the grave key is usually a dead key, used as the first stroke in a two-key sequence: [grave]+e = è. In such cases, there is a way to generate the grave character by itself, either [grave][grave] or [grave][spacebar], if I recall correctly.

In Markdown (which this forum uses), you can trigger code mode one of three ways:

1. A single backtick (grave) before and after the text to be formatted as code
2. Triple backticks on a line by themselves before and after the section of text to be formatted as code
3. Four space characters (beginning at the left margin) before a line of text to be formatted as code

Unfortunately, method 1 does not support indentation, as multiple space characters are rendered as a single space. (I’d through method 3 did not, as well, but this proved wrong.) For instance, all three of the following examples are the same, except for how code mode is triggered:

Single backtick before and after each line
IF(
AND(
{Event Name} = BLANK(),
{Location} = BLANK(),
{Start Date} = BLANK(),
{End Date} = BLANK()
),
"SEND"
)

Four spaces before each line
(Note, there must be a blank line before the first code line.)

IF(
    AND(
        {Event Name} = BLANK(),
        {Location} = BLANK(),
        {Start Date} = BLANK(),
        {End Date} = BLANK()
        ),
    "SEND"
    )

Three backticks before and after excerpt

IF(
    AND(
        {Event Name} = BLANK(),
        {Location} = BLANK(),
        {Start Date} = BLANK(),
        {End Date} = BLANK()
        ),
    "SEND"
    )

As you can see, the final method places the code excerpt in its own scrollable window and performs syntax-specific highlighting. (Based on what language, I’m not certain; most Markdown implementations don’t highlight unless a language is specified after the first set of backticks.)

If you can’t tweeze a backtick character out of your keyboard, you can use the four-space method of triggering code mode.

Here is a handy Markdown reference.

Edit: Well, actually you can’t see the third method places the code in its own scrollable window, as the code excerpt wasn’t long enough.

IF(
    AND(
        {Event Name} = BLANK(),
        {Location} = BLANK(),
        {Start Date} = BLANK(),
        {End Date} = BLANK()
        ),
    "SEND"
    )

IF(
    AND(
        {Event Name} = BLANK(),
        {Location} = BLANK(),
        {Start Date} = BLANK(),
        {End Date} = BLANK()
        ),
    "SEND"
    )

Thank you. The cheatsheet helped a lot as well.

IF(
         AND(
                       {Event Name} = BLANK(),
                       {Location} = BLANK(),
                       {Start Date} = BLANK(),
                       {End Date} = BLANK() 
                       ),
         "SEND"
          )

Thank you so much for this. Very simple and easy to understand. I really appreciate your help.

If I wanted to swap this around, so the formula is if those columns are NOT blank how would I do that?

IF(
         AND(
                       {Event Name} = BLANK(),
                       {Location} = BLANK(),
                       {Start Date} = BLANK(),
                       {End Date} = BLANK() 
                       ),
         "SEND"
          )

Thank you for the formula! Much appreciated and worked great with the modification mentioned below.

If I wanted to swap this around, so the formula is if those columns are NOT blank how would I do that?

You could use

IF(
    AND(
        {Event Name} != BLANK(),
        {Location} != BLANK(),
        {Start Date} != BLANK(),
        {End Date} != BLANK()
        ),
    "SEND"
    )

or

IF(
    NOT(
        OR(
            {Event Name} = BLANK(),
            {Location} = BLANK(),
            {Start Date} = BLANK(),
            {End Date} = BLANK()
            )
        ),
    "SEND"
    )

Either should do.