Ask the Community

HelloI want to copy one cell into another when the first cell gets updated. I have a formula field that generates an output: eg. Monday, Tuesday, FridayAs soon that the formula field gets updated, i want to copy it in to a multible selection.It is important, that not the whole row gets copied only the cell with was updated.Thanks for yout Help!

Hello, I am trying to integrate with AWS, but I keep getting the issue of “Missing Authentication Token” when running my script to update records onto my AWS DynamoDB. I am following the guide given by Airtable on how to integrate this. Has anyone had a similar issue? Thank you, Sahith

I am trying to combine an IF formula with a DATETIME_DIFF formula and I am not getting the results expected. Goal: Determine the difference between two dates to see how long something takes, but never have a value of "zero." I want the lowest value to always be "one."Start DateEnd DateDuration (what I get)Duration (what I want, instead)1/1/20241/1/202401 1/1/20241/2/2024111/2/20241/4/2024221/4/20241/4/2024011/5/20241/10/202455 I started with this DATETIME_DIFF formula to calculate duration:DATETIME_DIFF({End Date},{Start Date},'days')Then I tried introducing an IF formula to replace "zero" with "one" when duration = "zero" (I tried many variations on this):IF(DATETIME_DIFF({End Date},{Start Date},'days'),0,1,DATETIME_DIFF({End Date}{Start Date},'days'))Airtable accepted some variations on this formula, but when it was accepted, it was automatically changed to this:IF(DATETIME_DIFF({Date Finished},{Date Started},'days'),0,1)And the result is this:Start DateEnd DateDuratio

So i have a problem that i have been trying to figure out for awhile now. Some of the data that I am tracking contains Julian Dates when i paste the data in. It is currently in the format of YDDD where 9045 = 2/14/19 or 0105 = 4/14/20 . I have been using excel to convert these 4 digit Julian Dates into Calendar Dates using the following formulas. For 2019: =DATE(2010+LEFT(C1),1,RIGHT(C1,3)) for 2020: =DATE(2020+LEFT(C1),1,RIGHT(C1,3)) This has been by far the fastest solution i had been able to find at the time to convert the date as all it takes is a few minutes to copy paste from airtable into excel and then copy paste into a different column in airtable the converted date from excel. I have not found a viable solution to convert the 4 digit Julian Date to a Calendar Date directly in Airtable so i thought about converting that 4 digit Julian Date to a 7 digit Julian Date (YYYYDDD). by breaking down the 4 digit date into several different columns in Airtable and using additional colum

Hi AllI am trying to build a formula to reflect Master project status based on (sub)project status. Here's what I have. So the hierarchy should be:If ANY of the project status contains "ongoing", then master project status to reflect "ongoing"If "ongoing" does not exist and any of the project status is "planned", then master project status to reflect "planned"If "ongoing" and "planned" do not exist and ALL of the project status is "hold", then master project status to reflect "hold"The remaining should reflect as "concluded"So in the below table, the correct reflection should be:Row 1, 3, 4, 6, 8 should be "ongoing" (because "ongoing" applies to any)Row 5, 7 should be "planned"Row 2, 9, 10 should be "concluded" Thank you!!

Hello!Situation:I have a table named « Leads » in which is all the information of my prospects (first name, last name, email, phone Numbers).These prospects, via a Tally sent by email, inform their needs with regard to 9 products (always the same). Some customers take all product references, others only 1, nothing is mandatory.With my current organization and a Make automation, the columns that have the title of the different product references are also in the leads table, which is not very optimized.So I created a new "products" table in which a row corresponds to a 1 product and each column to information containing the latter (name, reference, power).Here is my question: how can I ensure that when prospects indicate the products they want via the Tally, the information is properly / correctly stored on airtable?I don’t understand how to establish good relation/look up.The purpose being in the second step to concatenate the product infos + quantity in order to be able to place it on

 

I have made a formula to calculate the date difference between start date and end date and returns a value in terms of day and hours as a fraction like "4.75" here is the formulaIF(  {End Date} >= {Start Date},  ROUND(DATETIME_DIFF({End Date}, {Start Date}, 'hours') / 24, 2),  'Invalid')But right know i want to change the above formula only for working days tho, i know there is a formula to calculate the working days difference  WORKDAY_DIFF({Start Date}, {End Date}) hence it returns in terms of days only like "4" but i want to return the hour also like "4.71" 

I wish to add files to records from Google Drive.I thought Airtable's Attachment field had no native integration for this - but, actually, when I open the "Add an attachment" window, I see a range of files services including GDrive, with which I can authenticate (what's going on?)...However, there is also a problem...Whilst the subsequent file browser shows my GDrive files which I own, it does not show files shared with me to which I have access. While shared folders are visible, their file contents are not available to select.This is in contrast to Monday.com. In that, I notice that shared-with-me files are available to add just fine.Is there any way to enable this, please?

If anyone from airtable is reading this my extension was submitted several weeks ago and I've heard nothing so far. thanks. No reply from the reply address I was given when submitting it.

How do you work on Airtable when ther is no network ?Modern Web&Mobile developpement provides features to cache content and postpone request in order to make UX available partially offline.But ...Interface, Forms, etc ... are not available as a mobile app (unless you hack it using Kiwi Browser)AirTable mobile App seems not to be a lot of cachingDid someone find a workaround or a Chrome Extension wrapper ?

Hi all!Maybe someone has solved a similar problem.I'm making a kind of task tracker, but I can't solve the following problem. I want to do the following in the task picker interface:1. You can select a record from the database (already done)2. For the selected entry, using the button, you can create a related task entry, which will be linked to the firstHow to solve the second point? I tried different variations of automation, but nothing worked for me

Especially for the calendar view, if I could select the label image to be a collaborator field, so that it uses the collaborator's Airtable image, I think it would be really nice.That's it, really. I hope this made sense.

I am trying to recreate a page designer extension on a new table within my base. When I switch the tab over and go to edit the page, the image field is not loading. I am copying the image url with the attachment uploaded and receive the message in the screenshot below. Is this functioning correctly or am I doing something wrong?  

I have a column called “Date”. I’d like another column to look at my date column and if the date is in the same month as TODAY(), then it should say “This Month”. If the date is last month when compared to TODAY(), then it should say “Previous Month”. To be clear, I don’t want it to look at the previous 30 days. So, if a record has a date of 06/30/20 and today is 07/01/20 then that record would say “Previous Month”, but its month is in a previous month when compared to TODAY(). Does that make sense?

Looking at the great PowerShell community posts on GitHub, I cannot find an example of a JSON body formatted for Airtable for multiple records. the following CURL works, APIkey removed. While I can format the JSON Airtable likes for a single record in the payload, I cannot seem to get the script write to wrap the JSON with the "records";[ values that Airtable wants. I currently am trying the following in Powershell but the JSON is not formatted correctly. Any tips?  Depth 3 is works for a single record. #now wrap with fields value Airtable wants[PSCustomObject]$AirtableRecordsWrap = @{records = $AirtableWrap}# Convert the object to a JSON string depth of 3 is required to get extra '$jsonBody = $AirtableRecordsWrap | ConvertTo-Json -Depth 4  ============this CURL script will work, with API removed====================curl -X POST https://api.airtable.com/v0/appQxHpZdplpm8i6V/IPConnections -H "Authorization: Bearer [APIKEY]" -H "Content-Type: application/json" --d

Hello, I have a cell with a date picking like "20240204 12:00" and I would like to format the date to "Feb 4th".I don't find how to reformat in this particular format.  Thank you for your help ! 

I've got a single select field for an address, and I want to autofill a secondary field based on that selectionIf 123 Street is selected, then it returns the corresponding email, etc.I'm using the below formula, but it keeps returning info@email.com regardless of the selection. IF(OR(Address="1234 Street",Address="1234 Road"),"Info@email.com","Info@email2.com") What am I doing wrong?

All of sudden this morning, when I logged on to my base, I realised all of my PDF attachments are gone. Instead the cell displays a broken picture logo.  How do I get the attachments back, this is very important to me.

So, I have over 3,000 people in my database that people can opt in to help the charity in numerous ways like being: volunteers or subscribers or sponsors or trainers etc etc but some people has said they can help by doing a few of those options.My problem is that this data is pulled in from other platforms (Active Campaign, google forms etc etc) and I have zapier populating my CRM everytime a new form is submitted.  This means I currently have 3 records for a 'Mr Smith@email.com' as he offered to be a 'volunteer' and a 'sponsor' and he as subscribed to our newsletter.  So he now has 3 different record ID's as my CRM creates an ID for each new entry. I need a formula or an automation that creates a Unique ID that is linked to an email address so if he registers for a 4th option his Unique ID will automatically populate the ID field with the same ID as the other three if that makes any sense at all!! 

Context.  End user tool to help filter many products to a manageable few, filtered by users' selected constraints.  They can then drill into detail (data sheet attachment column) and ideally, select a subset of filtered products to get more info on.   Single table. ~400 products. 8-10 attributes any of which may or may not be selected/filter-constrained by user. *Dynamic filter:  from https://support.airtable.com/docs/shared-view-url-filters  I figured out how to collate filters   (  ..airtable form URL....?filter_sensitivity=presence&filter_colour=silver&filter_mount=wallCurrent thinking (please guide/correct me):1)  Customer (on mobile) clicks through to form  (imagine 10 drop down (attribute) boxes, appropriately labelled)2) Submit/Find button generates dynamic URL from user selection which filters shared grid view *(above)A)  My understanding is Airtable is unable to generate dynamic URL from a form submi

When you input a not existed value in a linked column. A new record would be created in the linked table. How can I stop it from creating new records automatically?

I created an automation with a Webhook trigger. When calling that webhook, I want to run a script that reads the webhook data (POST) and use them in my script. I haven’t found how to do something as simple as that so far. I’m starting to believe this isn’t possible.

Hey,I recently came to the conclusion that many of my existing spreadsheets would actually make much more sense if they'd become databases. So I started playing around with designing some of those, and while majority was smooth, my gym workouts became a big challange for me.First of all, I struggle with design correctly the base. I had a couple of different approaches I've tried, and everything seemed to be overly-complicated. The problem is, whenever I get somewhere, all I have in my head is a possibility to export this base in a fairly simple format, which I could take and send to my trainer (I do it weekly). I've attached a screenshot of my existing plan in Google Sheet. I'd love to generate something similar in Airtable. I'd appreciate any kind of brainstorming 🙏

So, I have contacts that have been pulled into Airtable from different sources (Active Campaign, Google Form, etc). Each data source is in it's own table and I have created a fourth table where I have pulled in EVERYONE using automations, lookups and roll ups. I have then grouped the view using email address and what I now have is a brilliant view of a single contact and how they are involved in our company. In my example below, I can see that she is a 'Puppy Handler' (pulled in from google docs data) and she has also subscribed to a few of our marketing emails (pulled in from activecampaign)... However, autonumber have given her 5 different ID numbers as she has a total of 5 entries within the base... is there anyway I can create a singe ID for her using her unique email address as the unique value???