Solved

Hi All, I am trying to go around this nested formula and hope someone could help me try understand why is not working. I have three {columns} that indicate if a condition is either 1 or 0. So: column 1 can be 1 or 0 column 2 can be 1 or 0 column 3 can be 1or 0 I have a fourth formula column where I want to indicate the following: IF column 1,2,3 are all 1 then show “status A” IF column 1,2 are 1 and 3 is 0, then show “status B”, IF column 1,2,3, are 0, then show " status C" I have tried this formula but it wont go through: IF( OR( FIND(“1”, {column1} ), FIND(“1”, {column2} ), FIND(“1”, {column3} ), ), “status A”, IF( OR( FIND(“1”, {column1} ), FIND(“1”, {column2} ), FIND(“0”, {column3} ), ), “Status B”, IF( OR( FIND(“0”, {column1} ), FIND(“0”, {column2} ), FIND(“0”, {column3} ), ), “Status C”, ) Thanks for whoever takes time to help out with this.

Hello, I’m trying to make a formula that counts the difference between start date and end date, however if end date is blank calculate the difference between start date, and current date. Sorry if it sounds simple, i’m very new to airtable! Thanks Matt

Hello, I have a table of People. Each person is linked to a Property via a lookup field. I want to add a field to the People table that assigns them a value based on which Property they’re linked to and when their Date Created is. So for example: for all the People in the table who are linked to 123 Main St, I want the first (by Date Created) 100 records to have the value of 1, the next 100 People records to have the value of 2, and so on. Does anyone have any ideas for how to go about doing this? Thanks so much!

I’ve searched the forum and tried to figure the formula out on my own but I’m not even sure if this is possible in Airtable. Any help would be appreciated. I have multiple columns where entries are either numbers or blank. I’d like to be able to generate a phrase that puts all these numbers and field names together as text. xfieldname is the name of the column. All cells in the column are numbers or blank. xvalue is the number in the column. Final field is text If xvalue > 0, return “xvalue xfieldname” If not, return blank [insert comma] If yvalue > 0, return “yvalue yfieldname” If not, return blank Final output is: xvalue xfieldname, yvalue yfieldname I’ve tried: IF({Set of Pins}>0, “{Set of Pins} set of pins”, “”) Which of course produced “{Set of Pins} set of pins” instead of the actual number in the column. Example: If the “pairs of socks” column has “2”, the “hats” column has “3”, and the “set of pins” column is blank, the final output is: 2 pairs of socks, 3 hats

Hi, I have a table with 3 columns, “Usage”, “Clients” and “Status”. “Usage” is a single select and can only be “Platform” or “Client”. “Clients” is a link record that allows me to select multiple client records from another table. “Status” is a lookup field returning the status of each client from the client field, it displays the results in a comma separated list. Possible values for “Status” are “Live”, “Suspended” and “Terminated”. I need to write a formula that satisfies the following conditions: If “Usage” = “Platform” set the cell as “Active” If “Usage” = “Client” AND the value “Live” is present anywhere in “Status” column then set the cell as “Active” If “Usage” = “Client” AND the value “Live” is not present anywhere in “Status” column then set the cell as “Inactive” If “Usage” = “Client” AND the “Status” column is blank then set the cell as “Inactive” The formula’s I’ve tried so far don’t work. I’ve tried using IF(AND statements and IF(SEARCH statements but I can’t get them t

I’m tracking some healthy practices every day: Exercise = Multiple Select (Running, Pushups, Squats) Mediation = Duration Healthy Food = Checkbox And some negative practices: Alcohol = Number If Exercise is not empty, I want the Formula to return +1 If Meditation is greater than 0:10, I want the Formula to return +1 If Healthy Food is checked, I want the Formula to return +1 If 2 of these are True, I want to return 2 If 3 of these are True, I want to return 3 If alcohol is greater than 1, I want to subtract 1. So if all 3 positive behaviors were valid it would be 3 - 1 = 2 Then I will create a color filter and apply: 0 or -1 = red 1 = orange 2 = yellow 3 = green I know this is a complex request, I appreciate any help you may be able to provide. Thank you in advance

Hello, Any possibility to print the gantt block to pdf ? Regards

Hi, I am new to Airtable and am trying to build a query that will act like a global search across multiple columns. Our members table has the following columns {‘Full Name’,‘Phone’,‘Email’} that I would like to search. I want to have a single search field on our site to look up members by either their Full Name, Phone, or Email. This is the query that I am using, but it doesn’t work, and I have tried many incantations to no avail… record = await table.select({ filterByFormula: OR(‘Full Name’=searchString, ‘Phone’=searchString, ‘Email’=searchString), fields: [‘Member’, ‘Full Name’, ‘Phone’, ‘Email’, ‘Status’, ‘Member Photo’] }).firstPage().then((records) => { rec = records[0][“fields”]; return rec; }).catch((err)=>{ console.error(err) }); The above code works great if I use a simple filterByFormula such as: filterByFormula: 'Member=' + member_id Thanks in advance for any assistance!! Mike

I’ve displayed an airtable created by someone else on this web page migrants-info.eu/jrs-activites-jeunes/ Is there a way to make it automatically show the latest activities ? or even better, center the display on activities closest to the current date ? thanks in advance for your help !

With the below personas in mind… Client: company we’re working with Event: the event we’re doing for them Contributor: an individual (outside of our company or the client’s) who is helping to put on the event I am able to store the following relationships between: Clients and Events. One client can have many events. Contributors and Events. One contributor can have many events. Events and Contributors. One event can have many contributors. However, I also need to be able to store additional information about each Contributor’s performance at each Event (e.g. rating, comments, fee, etc.). I tried to create a fourth table to store the ‘additional’ information about a Contributor’s Event performance with the below columns, but I can’t seem to get one row for each relationship. Instead, I am seeing multiple Campaigns for each Contributor (which is already stored elsewhere). Primary field (auto-numbered; not used) Campaign (link to Campaign table) Contributor (link to Contributor table

OK, hope someone can help here: I have a table names “ProdCo” - companies I’m following: In this table, I have a field named “Owner” - that links to a table - same name - where I put, among other things - email addresses: I now want to target certain companies for a sales initiative. I made a “check box” field in “ProdCo.” table to tag these companies. My question: How can I most efficiently generate a list of these Companies with their owners with their email addresses, I cannot for the life of me figger that out. Thanks in advance for any thoughts, Perry

Hi! I’m trying to use a formula or count to use in my base. I have in a board all the information for each of the employees and in another table I have the departments and I want to add how many women or men I have in each department. How can I count them with a formula?

I have two tables with customer information that I use for CRM. For every customer record in table-1 there needs to be one and only one record with the same customer name in table-2. The tables are linked by the customer name. The primary field in table-2 is a formula that is equal to the name of the customer in table-1. Table-1 structure CUSTOMER NAME FIELD1 FIELD2 (… sensitive data) TO_TABLE-2 (linked field, to one and only one) Table-2 structure CUSTOMER NAME (formula so it is equal to field TO TABLE-1) … data accesible by a third party TO TABLE-1 (linked field, to one and only one customer in Table-1) They are separated in order to give different view/edit permissions to different people. Manually everything works fine. But I create customers on the go in my cell phone and can easily forget to create the corresponding customer in table-2. Is there a way to automatically create and link the customer record in table-2 when a customer is created in table-1? Thanks!

Trying to get the “)” to display after the “X” in COMX (({SchDep} & “-”) & {Dest} & “-”) & {LdTo} & " (" & {SCAC} results in: 2200-KLO-KLO (COMX but (({SchDep} & “-”) & {Dest} & “-”) & {LdTo} & " (" & {SCAC} & “)”) results in a formula error. I’m also unable to display the date from a date field as part of the formula. It ends up looking like 2019-17-26-T00:00:00.000Z Also, is it possible to formulate two linked records {A} and {B} to display in one cell with the above?

Hi there, I am looking to setup an approval queue for our membership service, whereby applications are brought into the “Applicants” base, and when the dropdown selector for “Approval Status” is set to “Approved”, the record is added to our “Members” base, and deleted from Applicants base. Is this doable? Any idea how I could achieve this? Thanks so much! Adam

Trying to achieve an outcome where: IF Column One is prefixed 381 then Apple If column one is prefixed 382 then orange etc Column 1 381-9287 382-2818 383-2812 Column 2 formula Thanks!

For creating books, I have 3 main tables - Projects -> Titles -> Tasks When I create a Title, I almost always have 3 “tasks” that need to occur. What is the best way to set up a way to replicate this workflow? without having to cut/paste text and worry that I have a setting or pull-down wrong!!

Hey guys, I am wondering how I would go about importing text from another field like “Diamond Plus” and translating it into “diamond-plus”? Any way to do this without just building a really long IF statement? Thanks so much, Adam

>>> a.get_all() Traceback (most recent call last): File "/Users/snatsai/project/airtable/lib/python3.6/site-packages/urllib3/connectionpool.py", line 603, in urlopen chunked=chunked) File "/Users/snatsai/project/airtable/lib/python3.6/site-packages/urllib3/connectionpool.py", line 344, in _make_request self._validate_conn(conn) File "/Users/snatsai/project/airtable/lib/python3.6/site-packages/urllib3/connectionpool.py", line 843, in _validate_conn conn.connect() File "/Users/snatsai/project/airtable/lib/python3.6/site-packages/urllib3/connection.py", line 370, in connect ssl_context=context) File "/Users/snatsai/project/airtable/lib/python3.6/site-packages/urllib3/util/ssl_.py", line 355, in ssl_wrap_socket return context.wrap_socket(sock, server_hostname=server_hostname) File "/Library/Frameworks/Python.framework/Versions/3.6/lib/python3.6/ssl.py", line 377, in wrap_socket _context=self) File "/Library/Frameworks/Python.framework/Version

Hey, I’m new to the airtable. In this video, we can see how to apply the auto-fill the data or formula in all fields. https://www.youtube.com/watch?v=5Y-PyB-F4lo What if we can automate this if we have 50+ tables to automate the same process? Is there a way to automate the auto-fill process in every field? This will remove the manually auto-fill the formulas on each table.

Hy Guys, We’re trying to do a formula in order to create a new graph within our dahsboard. However it keeps telling us that: => Y-axis field “Pourcentage_retard” is not numeric The formula that we’re using is: => IF(nb_intervention=0, “0”, inter_retard/nb_intervention) I’m wondering if a need to add a formula to switch to numeric. Thanks in advance!

I have a Base with a Table for each week. Every week, I add a new Table with a new set of data for that week. I need a Summary Table that pulls from the same column in each of the weekly Tables. Any suggestions? The less I have to configure each week, the better. Seems like a simple function!? Thanks!

I am have two tables. In table 1, I have: a (non-primary) field with 3 single select options (let’s call it field A) a field linked to records in table 2 (field B) In table 2 , I have: the table’s primary field, from field B in table 1 (field C) a field that counts the number of linked records (field D) I would like to filter the field that counts the number of linked records (field C) in table 2 so it only counts for one of the 3 single select field (field A) in table 1. I looked around the forum, and some answers seemed to deal with the same issue but I could not get any to work for my case.

I am new to Airtable and trying to use lookup to pull first and last names based on an ID number in a table (called log) that will be constantly receiving new records. I have a second table set up with all of the ID numbers, first names, and last names that is linked, and the lookup set for the first and last name fields. However, with the lookup I am only getting the names for the first occurrence of an ID and they are not loading for any new records that are created. I have the settings enabled to allow linking to multiple records. How can I get it so that the first and last name automatically load for all records.

Hi all, I’m currently struggling with a thorny Airtable formula issue. I think I need to be considering using a nested IF statement or a SWITCH formula, but i’m not 100% convinced that either will work. Here’s my problem statement… I need to analyse the outputs of five columns, each of which is populated by a unique, formula-generated text value. Based on different combinations of these text values, I need to display a different summary sentence. I thought that I could solve this issue by using the following nested IF statement… IF({Biz Rules Provided Summary} = “Incomplete”,“Awaiting Business Rules”, IF({Analysis Complete Summary}) = “Analysis Incomplete”, “Awaiting Analysis”, IF({Screen Designed Summary}) = “Design Incomplete”,“Awaiting Screen Design”, IF({Developed Summary}) = “Dev Incomplete”,“Development Incomplete”, IF({Function Configured}) = “Config Incomplete”,“Awaiting Configuration”,“Function Configured”))))) However, this formula doesn’t work. It seems to get stuck after th